Carpet Layers Near Me: Get Quotes From The Best Local Carpet Installers
These 11 General Steps to Carpet Laying will Convince You to Just Hire Carpet Layers Near Me
If you’re like most homeowners, you’d love to have wall to wall carpeting for your home. Aside from the fact that it provides beauty to your flooring and improves the overall appeal of your home, it provides a lot of additional benefits like sound control, additional insulation and comfort.
If you’re also like a lot of homeowners, you’re considering doing it DIY. Sure, you’re looking for carpet layers, but you’re probably just interested to know how much their services cost. A good part of you believes that it’s something that you can do. After all, you just need to lay down the carpet from wall to wall. Sounds easy enough, right?
Actually, it’s not as easy as it sounds. Sure, you can probably get it done. However, there’s a massive difference in getting it done and getting it done right. If you want to experience the benefits of carpet flooring, you have to get it done right. Unfortunately if you’re like most homeowners, you don’t have the right skills, experience, knowledge and tools to get it done right.
Materials and Tools Needed
Speaking of having the right tools, you need the following tools and materials for this project:
- Strip (the tackless variety)
- Hand stapler
- Tack strip cutter
- Top cutter
- Wall trimmer
- Knee kicker
- Measuring tape
- Stair tool
- Carpet knife
- Power stretcher
- Razor knife
As you can see, this task requires highly-specialized tools. Sure, you can save on the contractor’s cost by going DIY instead of hiring local carpet installers near me, but are you really saving money considering that you have to buy these tools and materials to do this task?
If you’re not yet convinced to just hire a carpet layer, read on to know the process of carpet laying and see how complicated it is.
Step by Step Guide to Carpet Laying
These 7 general steps of carpet laying will convince you that it’s a complicated task that requires the expertise of professionals:
- Measure the room’s area.
Multiply the width and length of the longest walls in the room where you’re going to install the wall to wall carpet. Divide this by 9 to get the square yards. This is the room’s area but you should consider errors, matching and irregularities so add 10%.
- Clean the floor.
The floor should be really clean. It’s time to use some elbow grease in sweeping and vacuuming the floor thoroughly. It should also be smooth so scrape whatever compound is on the floor.
- Take out the door.
The door can get in the way so it’s a good idea to take it out first.
- Put the tackless strips in place.
This is one of the first main challenges of this task. Do it wrong and you’ll have sharp tacks that can hurt your feet and damage the carpet. You should also make sure that you’re using the right size.
Generally, you should install them half an inch from the wall. They can be held in place using an epoxy adhesive or masonry tacks if you have a concrete subfloor.
- Lay the carpet pad.
This should be done in a perpendicular manner. Use the staple hammer to staple it by the tackless strips. You should also staple the pad seams, if any.
- Trim the carpet pad.
Use the utility knife for this task, using the tackless strips as a guide.
- Notch the corners for the trimming process.
This is where the carpet layers will come in handy. In most cases, you need to take the carpet outside.
- Trim the carpet.
This is where perfect measurements will come in handy. There’s no going back here if you trimmed with incorrect measurements.
- Lay the carpet.
Make sure to do it straight. Trim the excess, if any.
- Make and glue seams.
Make a seam. Make sure to check the carpet’s edges. Glue the seams.
- Finalize the carpet laying.
At this point, you have to finalize the process but this is a multi-step process that professional carpet replacement companies near me can easily do. You need to trim excesses, stretch the carpet, and finish with the carpet’s trimming.
These are just general steps and each step requires highly-specialized tools and several other steps. If you have the time and effort needed and you can afford to make mistakes, then go ahead and try to lay the carpet on your own. Just make sure that you have the budget to buy the tools.
If you don’t have the time and you simply want the best results, check out the carpet contractors, do your research on them, and hire the best carpet layer that you can find.
How to Find the Best
You just need to perform the following steps:
- Use the form on our site.
Just complete the form and send it. The best carpet layers in your area will receive your details and they’ll get in touch with you with their best quotes.
- Compare the quotes.
Using this free service, you’ll get up to 4 itemized quotes. You’ll be surprised at how affordable hiring a carpet layer can be using this service. Compare them so you can find the best among the best deals.
- Get in touch with your chosen carpet companies.
Ask questions. Clarify the items in their quotes. Verify their credentials. You can also finalize at this point if you’re happy with everything.
As you can see, hiring a carpet layer is easier. You just need to do 3 steps and they’ll take care of the rest. Add that to the fact that it’s more affordable compared to DIY with all things considered and it makes perfect sense to just use the form on our site to get in touch with the best carpet layers. Just make sure to compare the quotes well!