Contractor Quotes BG

13 Tools Needed for Drywall Work

Tools Needed for Drywall Work
Using a drywall involves a lot more than deciding what type of drywall to use. Yes, there are different types of drywall and it is important to understand each type to be able to choose and use the right one based on your needs. Getting the services of the best drywall contractors in your location is also recommended especially if you do not have the skills and experience to do the work DIY style.

The Importance of Using the Right Tools

Aside from proper training and experience, having the right tools is important to complete the work safely, quickly, accurately, and efficiently. Each tool has its own features and limitations. There will be a specific tool that will be helpful based on a certain situation so it is important to understand the different factors to know what tool will be most helpful for you.

Certainly, the success of drywalling or any type of work will depend on how skilled the person is working on the project and having the required tools for better precision and faster completion of work. Tools specifically made for drywall works are available, but there are basic tools as well which you can use that are not specifically designed for drywall works. These basic tools are tape measure, chalkline, framing square, and pencil.

For your reference, below are the tools needed for drywall work.

  1. Drywall saw – this tool is needed to cut through the gypsum core and paper face of a drywall board. To use it, just use the pointed part to break through the drywall material. This will allow you to start cutting the board.
  1. Drywall hammer – this drywall tool has a slightly tapered or elongated head which creates a normal recess for the drywall joint compound. When used for cutting through the paper surface, the tool produces a waffle-like contour that is helpful in locking the compound.
  1. Drywall screw gun – this tool is helpful to drive a screw into the drywall board. It comes with a clutch to make sure that the screw will just go below the drywall layer.
  1. Utility knife – this tool is helpful in cutting through the face of a drywall to make a notch on the panel prior to snapping it to its length. It is important to ensure that the blade is razor-sharp all the time.
  1. Screw gun – screws are needed in installing drywall. The screws ensure that the drywall is properly attached and secured on the walls or ceilings. They also provide longer connection, which prevents early damage.

For a big drywall project, use a self-feeding drywall screw gun for a quicker execution of work. This screw gun’s depth can be adjusted depending on the thickness of the drywall board that you are working on. Another great feature of this tool is being available both in wireless or wired models.

  1. Drywall hammer – aside from screws, nails can also be used to attach or secure a drywall board on your ceiling or wall. A drywall hammer is used in this situation.
  1. Mixing tools – mixing tools are important when it is time to work with drywall joint compound. A joint compound is used to fill in holes on the board, mask the tapes or plasters, and fill in any gaps on the surface. This compound solution can be mixed using your hands. Alternatively, you can also attach a paddle to your drill to come up with a mixing device.
  1. Taping knives – this tool measures between 25 and 150 mm wide. It is used when dealing with tapes and in smoothening out an area with joint compound.
  1. Sanding tools – after taping or applying joint compound on drywall, the surface should be smoothened out through a process called sanding. A sand paper is needed to complete this process and make sure that the drywall surface is free of blemishes, marks, or bumps. A sanding sponge can also be used while a pole sander is recommended for ceilings. Know the different finishing tips to learn more about this process and how it can be done properly.
  1. Tape – joint tapes are used to strengthen the seams in between drywall boards. It can also be used to repair cracks on the walls. A paper tape used to be the only choice for drywalling. It is 2 inches wide with a crease in the center for easy folding.

A fiberglass mesh tape is more popular than the paper tape as it is easier to use. It is available between 1 ½ and 2 inches and can be bought in self-adhesive rolls and non-adhesive rolls. This tool is helpful when dealing with gaps or holes on a drywall board.

  1. Joint compound – this is used to fill in any holes or gaps on the surface of a drywall. This in available in the market in pre-mixed condition which means that you just need to add the right amount of water to start using it. The amount of water will define the texture of the compound.

The ones available in the market are graded per drying time. A taping compound is used as a first coat. This is fast drying and coarser. Topping compounds are thinner and are used as a top or outer coat. An all-purpose compound, on the other hand, is in the middle if compared to the description given for taping compound vs topping compound.

  1. Fiberglass non-adhesive tape – this type of tape needs to be stapled on top of the seams to attach it or secure it in place. Because of this, this tape is known to be more difficult to use than the self-adhesive tape. A utility knife is needed when dealing with a non-adhesive tape
  1. Fiberglass self-adhesive tape – this type of tape is like the normal tape where it can simply be pressed against the seams to put it in place. This is more expensive than the non-adhesive tape.

If you don’t have these tools needed for drywall work, it’s better to hire a pro.