Plumber Quotes from Companies Near You: How Much does a Plumber Cost?

Benefits

  • Save time
  • Save money
  • No-obligation quotes
  • No project too small

Get 4 Free Quotes From Competing Contractors

Type of Service
Project Details
Contact Info

Please Choose The Type of Service

It only takes 2 minutes to fill out the form

Type of Service
Project Details
Contact Info
step 2 of 4
Type of Service
Project Details
Contact Info
step 3 of 4
You are almost done - fill out this last step
Type of Service
Project Details
Contact Info

This information makes it easier to coordinate with pros.

Please fill this field
Please fill this field
Invalid zip code
Invalid email
Invalid phone number
Invalid address

By law, we're required to inform you that you consent to being contacted about your project after completing the form. We will not contact you with anything else.

Thank you!

Our specialists are currently reviewing your case and will get back to you shortly.

When it comes to contractors, plumbers are among the most underrated and underappreciated. A lot of homeowners don’t really think of hiring one when it comes to their plumbing needs. This is because they’re under the impression that these tasks can be easily done DIY. While it’s true that a lot of these tasks can be done DIY, most of them are better off done by a professional.

It also doesn’t help that a lot of people disregard the need for a plumber until it’s too late. They see a minor drip and they think that it’s no big deal until they find out that part of their house is flooded already. They hear some sounds inside the wall caused by problematic pipes and they forget about them as soon as they stop.

On this page:

Think about this. Do you think your quality of life will be affected without running water inside your home? Will you be able to live without a good plumbing system? Let’s start with a basic. Can you start a cold day without a hot shower? Maybe answering these questions will convince you of their importance.

Maybe this is why you’re reading this article. You underestimated their importance and now, the problem is worse and you’re looking for plumber quotes from companies near you. Maybe you do know their importance and this is why you’re looking to hire one. Whatever the case may be, the important thing is you’re ready to hire one.

Don’t make the mistake of hiring one without considering the cost. You have to make sure that you’re taking advantage of the best deal and this requires knowing how much does a plumber cost. You also have to understand the inclusions to the cost for you to better appreciate it.

It’s also a good idea to know how these contractors can help you. We’ll provide you with a plumbing services price list guide so you’ll know what services they offer and how much you’re expected to pay for these services.

Speaking of services, we’ll talk about the some of the most popular tasks they’re called in for. We’ll talk about the cost to replace shower valve. There are also the common questions surrounding the water pressure regulator installation cost. How much does it cost to fix a leaking pipe? A lot of homeowners, maybe including you, want to know.

Maybe you also want to know the main water shut off valve replacement cost along with the cost to replace water pressure regulator. We also have you covered in case you want to know the cost to reroute plumbing and the cost to replace pipes under kitchen sink. These are just some of the services and their corresponding cost that we’ll talk about in this article.

The most important thing that you’ll learn from this article is how to get plumber quotes from companies near you. We’ll show you a nifty trick that will make these companies compete for your business. This way, you’ll be receiving the best available quotes that you can choose from. Read on to know more about this free service along with the aforementioned topics.

How Much does a Plumber Cost?

Obviously, we can’t tell you exactly how much does a plumber cost. This is because it depends on a wide variety of factors, especially the type of service that you need from one.

A lot of these professionals charge an hourly rate. If we’re going to base it on the national average, you can expect to pay around $120 per hour. Newer plumbers will probably charge you closer to $50 per hour, while more experienced ones will charge around a $200 hourly rate especially for a complicated task.

A typical job will set you back around $300. That’s also a flat rate that some plumbers would charge.

Plumbing Services Price List Guide

The most important factor when it comes to determining the cost is the type of service that will be rendered. This plumbing services price list guide will talk about the different services and their corresponding costs.

Cost to Replace Shower Valve

You can expect to pay over $150 per valve. Most showers have multiple valves so you can multiply this with the number of valves that you have to get the total cost.

You’re basically paying for 2 things – labor and supplies. This is estimated to be a 9 hour job so you can expect to pay around $800 to $950 on labor. A typical job will require 6 valves. Adding the supplies and materials needed, this will add around $170 to $200 to the total cost to replace shower valve.

Water Pressure Regulator Installation Cost

You can expect to pay around $300 for this task. The regulator itself costs around $50, so the labor is more or less $250.

How Much does it Cost to Fix a Leaking Pipe?

You can expect to pay more or less $250 for this task. That is if you know the location of the leak. If you need the plumber to locate it for you, then expect to pay around a hundred dollars more. You can only hope that there’s no drywall damage because that’s going to set you back around $500 for repairs.

The worst case scenario is if the pipes burst. You can expect to pay around $2500 to fix the damages including water damage since this issue will lead to flooding.

Main Water Shut Off Valve Replacement Cost

This is one of the more affordable services at a little over $200. This is because the shut off valve is very affordable at less than $25 so you’re just paying for the labor. Considering the importance of this valve, you do have to pay for labor to ensure that a professional replaces it.

Cost to Replace Water Pressure Regulator

This is another important part of the plumbing system of your home. It regulates the water pressure coming into your home. Without it, your pipes can burst. This is why you have to replace it if needed.

You can expect to pay around $300 for the task. Labor is more or less $250. This is because even a professional will require about 3 hours to finish this task.

Cost to Reroute Plumbing

National average is about $725. However, it can be significantly higher or lower. The length of the plumbing will determine the cost, as is its location. The easier it is to access, the more affordable it’s going to be.

Cost to Replace Pipes Under Kitchen Sink

It can go as low as $100, but the national average is around $225.

Plumbing Cost Calculator

Here are other plumber quotes from companies near you:

Water Heater Installation

You can expect to pay around a thousand dollars for this project. However, expect to pay a whole lot more if you’re going for the tankless variety. The cost can go as high as $3,000 for this variety. This is because it takes way longer to install especially if retrofitting is necessary. It may take half a day while the tank variety will only take a couple of hours.

Another consideration is the type and brand that you’re going to choose. A gas unit can cost as low as $250 while an electric unit starts at $300.

Your location will also be a factor. For example, this project is generally more affordable in Chicago than it is in San Francisco.

Gas Pipe Installation or Repair

Installation will cost you more or less $500. The lines will cost around $20 per linear foot. This will include the materials and the labor. Speaking of labor, this task is best reserved for a master plumber who will charge around $100 per hour to get the job done.

Some factors to consider include the type and size of the pipe. For example, PVC is more affordable than galvanized steel together with black iron. Where the pipes are located will also determine the total cost, together with how many fittings are required because of the number of turns.

The cost will go up significantly if you need to add a line to your home from the street. It’s not unusual for the cost to go over $2500.

Here are other more specific average quotes:

  • Gas line installation for a propane tank (around $40)
  • Gas meter installation (should be less than $500)
  • Installation of shut-off valve (around $400)
  • Kitchen stove gas line installation (more than $120)
  • Outdoor grill (at least $20 per linear foot)
  • Hookup for a water heater, drip leg or water heater (around $2500)
  • Gas fireplace (around $20 per linear foot)

The cost to repair a gas pipe will vary significantly. This is because there are a lot of possible issues and factors. A simple leak behind the stove will just cost a couple of hundred dollars, while you need to spend thousands of dollars if the lines need to be excavated.

You don’t have to think twice if there’s a leak. Contact a professional. Worry about the cost later.

Sewer Main Installation

You can expect to pay around $3000 for the sewer main installation. In some cases, you have to pay extra to hook it up to the sewer system of the city. This can cost a few hundred dollars to tens of thousands of dollars.

On average, you can expect to pay around $150 per linear foot for this project. Here are the possible additional costs:

  • Trenching ($400 per 50 linear feet)
  • Backflow preventer (around $650)
  • Sewer cleanout (more or less $2000)

There are also factors to consider that affect the cost:

  • Type of house
  • How far it is from the connector line
  • Permit requirements
  • Hurdles

If it’s a replacement job, expect to pay around $16000.

Sewer Main Repair

A lot of homeowners pay around $2500 for this project. Here are the potential problems and their average cost:

  • Removal of tree roots ($350 plus another $350 to use a sewer camera)
  • Damaged pipes (around $1000)
  • Collapsed line (around $150 per linear foot)
  • Trenching (around $8 per linear foot)

New Pipes Installation

This is dependent on what type of fixture you’re installing. It’s about $1000 per fixture. New pipes installation for an entire home will cost you around $8000 on average. The total cost will be largely dependent on the type of pipe you’ll use, but you can expect it to be around $4.50 per square foot.

Tankless Water Heater Installation

Installation will cost you around $2000. The lowest you can hope for is around a thousand dollars, but it can easily go as high as $3000. An experienced plumber will charge around $100 an hour for this task, but it’s mainly your choice of equipment that will be the major determining factor of the total cost. It can cost as low as $150 but it can go as high as over a thousand dollars.

The good news is you may be eligible for a tax credit of up to 30%.

Septic Tank Installation

Unless you’re connected to the septic system of your municipality, your home would need a septic tank installed. It’s a very complicated system that requires professional installation. Homeowners pay an average of close to $6000 to have an aerobic system installed. That’s money well spent unless you’d want to live in a home with wastewater all over the place.

You can go for an anaerobic system if you want something more affordable because the average cost is just around $3500.

Septic Tank Repair

The average cost of repair is around $1500. This is for the most common issue of damaged pipes. You can hope that you’re not dealing with a damaged drain field because that can cost more than $13000.

Clean Septic Tank

It goes without saying that a septic tank has to be cleaned or pumped regularly. Fortunately, you don’t have to do it yourself. You also shouldn’t. Hiring a professional will cost you around $400 for this task.

You can help yourself by properly and regularly maintaining your septic tank. For starters, take care of your septic tank by not parking directly on it. Also, don’t plant trees over it. It’s also good practice not to flush down diapers, feminine pads, and the likes.

Installation of a Water Treatment System

The average cost is around $1700. Considering that this system will give you safe and clean water, it’s money well spent. Obviously, the cost will depend on what system you choose. Distillers are the affordable option as it’s usually just $1500 at most. You can go for the more expensive option which is the reverse osmosis system that costs around $600.

But the most cost-efficient option is a whole house system so you don’t have to worry about unsafe water. It can cost up to $10000.

Water Treatment System Repair

A lot of homeowners panic when their water treatment system becomes damaged. Suddenly, you don’t have clean water anymore. What are you going to do? You’re going to call in a professional for repair.

The average repair cost is close to $500. Although, repairs can reach close to $2000 or even more especially for a whole house system.

Toilet Repair

It’s one of the more affordable repair tasks. You can expect to pay an average of a little over $200. While some will charge per hour (as little as $45 per hour), a lot of plumbers will fix a flat rate especially if it’s just going to take a couple of hours. However, plumbers in more affluent areas may charge something as high as $150 an hour.

Water Main Installation

Installing a water main costs around $1500 on average. It can cost as low $200 but it can go over $4000 especially if accessibility is a concern. Depth and location are two other factors to consider, along with red tape often associated with getting a permit.

Water Main Repair

The national average is a little over $800. If you have an old plumbing system, repairs are needed more often. Make sure to have it checked regularly. You should also monitor for leaks.

Sewer Inspection Using a Camera

Using a camera is the most effective way to inspect a sewer. Expect to shell out around $500 for this which is worth it because it’s the best way to really see what’s wrong with your sewer line. Of course, you can expect to pay more once the issue has been determined.

Shower Installation

This is one of those tasks wherein the rate varies greatly. The national average for shower installation is over $3500, although it can be as low as around $1300 to as high as over $6000. This is because there are several factors to consider like the type of shower that you have or whether you want a tub to go with your shower as a combo.

Bathtub Installation

Installing a bathtub costs a little bit lower than installing a shower. The national average is at around $2800. The bathtub itself can go as low as a couple hundred dollars to as high as a couple thousand dollars. This will be a major factor especially since there are different bathtub types to choose from. Fiberglass is cheapest since it starts at around $200. Cultured marble, costing over $2000, is the most expensive option.

If installing a Jacuzzi tub, you should be prepared to spend anywhere up to $20,000. In addition, there are other considerations that can add to the price. These include the requirements for a water heater, electrical system, and additional support.

Faucet Installation

In some cases, an experienced DIYer can install a faucet. But if you want professional results, expect to shell out around $250. Hiring a professional is needed if the old faucet is rusted already and is broken in some parts and will be harder to remove. There are also upgraded features that a professional can install for you.

Sink Installation

Expect to pay close to $400 to install a sink. It’s money well spent because a new sink will really give a new life to your bathroom or kitchen. This is especially true if you’re going to choose a good style. The choice of style will play a major role in determining how much you’ll spend. For example, a farmhouse type will cost you over $200. On the other hand, a drop-in sink will cost less than that.

Installation of Liner for a Shower or Bathtub

This is a good option if you don’t want to spend for a new shower or bathtub. You can just spend for a liner installation. The national average is still over $3000, but it’s lower than installing a shower or bathtub.

Repairing a Clogged Drain

A clogged drain is never fun. It’s something that has to be repaired ASAP. You can expect to spend a little over $200 to hire a professional to snake the drain and clear it of clogs. In most cases, a plumber will charge a flat rate with an option to charge hourly if there are additional problems.

Repairing a Breakage in the Drain Line

A breakage in the drain line is a huge problem that will take around $700 out of your pocket. If your home is at least 20 years old, this is something that you have to prepare for because it’s inevitable. This includes the labor and the replacement parts needed provided that only a small part needs replacement. Speaking of labor, experienced plumbers will charge at least $45 an hour. More complicated tasks done by the best plumbers will set you back around $200 an hour.

Don’t wait until you’d have to do a new installation since that can cost you up to $15000.

Solar Water Heater Installation

This project will set you back around $3500. Obviously, this will be higher if you’re going to choose higher-end equipment, some of which can cost 5 digits. The more expensive ones usually feature evacuated tubes and flat plates collectors. You can expect to pay at least $70 for labor. A backup heater that can cost around a thousand dollars will also add to the total bill.

You will also choose between a passive and active system. The former averages around $2000 while the latter averages around $3000.

Water Heater Repair

The typical expense for this is close to $600. While there are some lucky homeowners charged as little as a hundred dollars, water heater repair can go as high as over a thousand dollars.

Water heaters are either gas or electric. Gas heaters average over $350 to fix. Most plumbers are called in to assess and reignite a pilot light wherein they charge at least $45 per hour. There may also be a need to replace a thermocouple (starts at $20), to replace a gas control valve (starts at $300) or install a new thermostat (around $80).

As for an electric heater, the common issue requires a replacement of the heater element that costs around $250. A thermostat may also be busted and will require around $175 to replace.

Toilet Installation

The national average is close to $400. Your choice of toilet will be the major determining factor. Is it round or elongated? Is it one-piece or two-piece? Does it have efficiency features?

Sump Pump Repair or Installation

The national average for repair is close to $500. A professional will charge a little over $50 per hour on average. On the other hand, installation will cost over $1100. It will depend on the type of floor and pump and the location.

Holding Tank Replacement

You can expect to pay close to $2000 for this. This is for a typical 55 gallon drum. Whether it’s above or below ground will also be a determining factor.

Storage Tank Removal

The national average is close to $1000. If there’s a need to remove it, the government requires you to do so because damaged storage tanks can wreak havoc especially to the environment.

Well Pump Repair and Replacement

This will cost you around $850. You need to call in a professional if it won’t start or stop or if the water pressure is too low.

Sewer Line Cleaning

Expect to shell out around $300 to clean a sewer line. This is for a typical snaking job. Hydro jetting can cost up to $600, though. For reference, a plumber may charge around $100 an hour.

Getting Plumber Quotes from Companies Near You

The estimates listed above are just that – estimates. The cost can be significantly lower or higher. This is why we recommend that you get plumber quotes from companies near you.

We have an easy way for you to do that. We’re offering a free service that allows you to get the best quotes from plumbers near you. All you have to do is to complete the form that you see on this page, send it, and the best plumbers nearest you will receive your details. With the understanding that they’re competing with other contractors, they’ll send you their best quotes. You can expect to choose from around 4 of the best and most accurate quotes so try it today!

Get The House You Always Dreamed of

Get Ready to Have No-Obligation Talks With Contractors

Talk With a Contractor